Flap wheels in Grit p60
Replacement flap strips in grit P60 come as 28-strip sets for the re-flappable QuickWood hub. Pick your flap height below (45mm standard or 65mm tall), then choose width and grit on the product page — every grit from P60 to P320 is in stock.
Replacement Flaps — 45mm, Fits Your Existing Hub
$45.00+
Replacement Flaps — 65mm, Flexible Trim Refill
$56.00+
When to use P60 flap strips
P60 is the coarsest grit in the range and the one to load when material has to come off: stripping paint or varnish from shaped parts, knocking down heavy machine marks, and reshaping edges. It cuts fast, so keep the wheel moving and let the flap tips work — parking a P60 wheel in one spot on softwood will dig. On a sealed or finished surface P60 has no business at all; it is a raw-wood and strip-work grit.
After P60
Follow the no-skip rule: step to P80 or P100 next rather than jumping straight to a fine grit, or the P60 scratch pattern will telegraph through your finish. Most stripping jobs run P60 → P100 → P150 before stain.
Fitting these strips
Each set is 28 strips for the re-flappable QuickWood hub, in your choice of 45mm standard trim or 65mm tall trim — choose 65mm when the profile you are stripping runs deeper than about 1.5 inches, a large ogee or crown for example. Swapping a set takes minutes, so many shops keep one hub loaded with P60 for strip days and a second hub in a finishing grit. Full project-by-project guidance is in the grit guide.