Pneumatic Air Sanding Tools
QuickWood air tools put flap wheel sanding on the end of an air hose. Each tool spins a flap wheel head sized for a different class of work, from detail sanding to full panels, using shop compressed air instead of an electric motor. They are the small-shop version of the same flap technology inside QuickWood production machines.
Best Selling Air Tools
Shop all: F1 · F2 · F3 · F6 · F15 · Pneumatic sanding drums
Common Questions
Which air tool fits my work?
What is a pneumatic sanding drum?
Pneumatic sanding drums are inflatable rubber drums wrapped in an abrasive sleeve. Air pressure sets the firmness, so the drum can be soft for contours or firm for flatter faces. They excel at bowls, curved rails and convex shapes where a flap wheel is too aggressive.
Do I need a big compressor?
These are rotary vane air tools with modest consumption compared to sanders that run continuously under load. Any small-shop compressor that runs a die grinder will run the F1 through F6; the F15 with its 8" wheel appreciates more tank. If your volume outgrows air tools entirely, the automatic brush sanding machines are at quickwood.com.
All tools take standard QuickWood replacement flap strips and ship free ground within the US on orders over $500; under $500, live UPS ground rates are calculated at checkout (shipping policy).
Pneumatic sanding drum sizes
QuickWood pneumatic sanding drums inflate to grip the abrasive sleeve and conform to gentle curves. Common sizes: the QW4 110×115, QW4 110×170, QW4 150×230 and QW4 220×230 with 30mm bore, plus the handled QW6 75×115. Browse the full pneumatic sanding drums category.
QuickWood air tool specifications
All three pneumatic hand tools run on standard shop air at 6 bar maximum (about 87 PSI). Figures below are from the QuickWood factory datasheets.
| Tool | Motor speed | Air consumption | Power | Working weight | Best for |
|---|---|---|---|---|---|
| F3 (2") | up to 1,700 rpm | 5 l/s (~10.6 CFM) | 170 W | 0.7 kg (1.5 lb) | Moldings, edges, detail profiles |
| F6 (4") | 900 rpm (1,500 rpm version) | 4.8–5 l/s (~10 CFM) | 170–190 W | 1.1–1.2 kg | Cabinet doors, drawer fronts, furniture parts |
| F15 (8") | 900 rpm (1,500 rpm version) | 9.6–10 l/s (~20 CFM) | 350–400 W | 3.5–3.7 kg | Edge sanding, panels, wider parts |
Size your compressor to the tool: the F3 and F6 run comfortably on a mid-size shop compressor, while the F15's ~20 CFM draw calls for a larger unit or receiver tank for continuous work.